IES Service Configuration Commands
Page 852 7750 SR OS Services Guide
bpgrp keyword
type ima
bpgrp-num 1 — 1280
ccag-id ccag-id.path-id[cc-type]:cc-id
ccag keyword
id 1 — 8
path-id a, b
cc-type .sap-net, .net-sap]
cc-id 0 — 4094
lag-id lag-id
lag keyword
id 1 — 200
qtag1 0 — 4094
qtag2 *, 0 — 4094
vpi NNI 0 — 4095
UNI 0 — 255
vci 1, 2, 5 — 65535
dlci 16 — 1022
sdp-id — The specified SDP to be cleared.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID to be cleared.
Values 1 — 4294967295
lease-state
Syntax lease-state [ip-address ipv6-address/prefix-length] [mac ieee-address]
Context clear>service>id>dhcp6
Description Clears DHCP6 lease state information for this service.
Parameters ip-address ipv6-address/prefix-length — The IP address of the IP interface. The ip-address portion of
the address command specifies the IP host address that will be used by the IP interface within the
subnet. This address must be unique within the subnet and specified in dotted decimal notation.
Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /30
subnets).
Values ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x [0 — FFFF]H
d [0 — 255]D
prefix-length 1 — 128
mac ieee-address — Specifies the 48-bit MAC address for the static ARP in the form
aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.
Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC
addresses.
To Next Page
Loading...
