Virtual Private Routed Network Services
7750 SR OS Services Guide Page 899
preference
Configures the preference for OSPF internal routes. 1096
reference-bandwidth
Configures the reference bandwidth in kilobits per second (Kbps) that
provides the reference for the default costing of interfaces based on
their underlying link speed.
1097
timers
Enables the context that allows for the configuration of OSPF timers. 1098
spf-wait
Defines the maximum interval between two consecutive SPF
calculations.
1098
lsa-arrival
Defines the minimum delay that must pass between receipt of the same
Link State Advertisements (LSAs) arriving from neighbors.
1099
lsa-generate
Customizes the throttling of OSPF LSA-generation. 1099
Table 1: CLI Commands to Configure VPRN Service Parameters (Continued)
Command Description Page
To Next Page
Loading...
