Alcatel-Lucent 7750 SR OS - Page 908

Configuring a VPRN Service with CLI
Page 908 7750 SR OS Services Guide
Configuring Router Interfaces
Refer to the 7750 SR OS Router Configuration Guide for command descriptions and syntax
information to configure router interfaces.
The following displays the command usage to configure interfaces used in service PIM
configurations:
Example: config>router# interface if1
config>router>if$ address 2.2.2.1/24
config>router>if# port 1/1/33
config>router>if# no shutdown
config>router>if# exit
config>router# interface if2
config>router>if$ address 10.49.1.46/24
config>router>if$ port 1/1/34
config>router>if$ no shutdown
config>router>if$ exit
config>router# interface if3
config>router>if$ address 11.11.11.1/24
config>router>if$ port 1/1/35
config>router>if$ no shutdown
config>router>if$ exit
config>router#
The following example displays the router interface configurations:
ALA48>config>router# info
#------------------------------------------
echo "IP Configuration"
#------------------------------------------
...
interface "if1"
address 2.2.2.1/24
port 1/1/33
exit
interface "if2"
address 10.49.1.46/24
port 1/1/34
exit
interface "if3"
address 11.11.11.1/24
port 1/1/35
exit
...
#------------------------------------------