VPRN Service Configuration Commands
Page 972 7750 SR OS Services Guide
Redundant Interface Commands
redundant-interface
Syntax [no] redundant-interface ip-int-name
Context config>service>vprn
Description This command configures a redundant interface.
Parameters ip-int-name — Specifies the name of the IP interface. Interface names can be from 1 to 32
alphanumeric characters. If the string contains special characters (#, $, spaces, etc.), the entire
string must be enclosed within double quotes.
address
Syntax address {ip-address/mask | ip-address netmask} [remote-ip ip-address]
no address
Context config>service>vprn>redundant-interface
Description This command assigns an IP address mask or netmask and a remote IP address to the interface.
Parameters ip-address/mask — Assigns an IP address/IP subnet format to the interface.
ip-address netmask — Specifies a string of 0s and 1s that mask or screen out the network part of an IP
address so that only the host computer part of the address remains.
Assigns an IP address netmask to the interface.
remote-ip ip-address — Assigns a remote IP to the interface.
To Next Page
Loading...
