Alcatel-Lucent 7750 SR - Page 1001

IES Service Configuration Commands
7750 SR OS Services Guide Page 1001
Parameters ancp-string — Specifies the ANCP string up to 63 characters in length.
app-profile
Syntax app-profile app-profile-name
no app-profile
Context config>service>ies>if>sap>static-host
config>service>ies>subscriber-inf>group-inf>sap>static-host
Description This command specifies an application profile name.
Parameters app-profile-name — Specifies the application profile name up to 32 characters in length.
inter-dest-id
Syntax inter-dest-id intermediate-destination-id
no inter-dest-id
Context config>service>ies>if>sap>static-host
config>service>ies>subscriber-inf>group-inf>sap>static-host
Description Specifies to which intermediate destination (for example, a DSLAM) this host belongs.
Parameters intermediate-destination-id — Specifies the intermediate destination identifier, up to 32 characters in
length.
managed-routes
Syntax managed-routes
Context config>service>ies>sub-if>grp-if>sap>static-host>managed-routes
Description This command configures managed routes.
route
Syntax route {ip-prefix/length|ip-prefix netmask} [create]
no route {ip-prefix/length|ip-prefix netmask}
Context config>service>ies>sub-if>grp-if>sap>static-host>managed-routes
Description This command assigns managed-route to a given subscriber-host. As a consequence, a static-route
pointing subscriber-host ip address as a next hop will be installed in FIB. Up to 16 managed routes
per subscriber-host can be configured.
The no form of the command removes the respective route. Per default, there are no managed-routes
configured.