VPRN Service Configuration Commands
Page 1170 7750 SR OS Services Guide
config>service>vprn>spoke-sdp
config>service>vprn>sub-if>grp-if
config>service>vprn>sub-if>grp-if>dhcp
config>service>vprn>sub-if>grp-if>dhcp>proxy-server
config>service>vprn>sub-if>grp-if>sap
config>service>vprn>sub-if>grp-if>arp-host
config>service>vprn>sub-if>grp-if>sap>sub-sla-mgmt
config>service>vprn>dhcp>server>failover
config>service>vprn>ipsec-if
config>service>vprn>ipsec-interface>sap>tunnel
Description This command administratively disables an entity. When disabled, an entity does not change, reset, or
remove any configuration settings or statistics.
The operational state of the entity is disabled as well as the operational state of any entities contained
within. Many objects must be shut down before they may be deleted.
Services are created in the administratively down (shutdown) state. When a no shutdown command
is entered, the service becomes administratively up and then tries to enter the operationally up state.
Default administrative states for services and service entities is described below in Special Cases.
The no form of this command places the entity into an administratively enabled state.
If the AS number was previously changed, the BGP AS number inherits the new value.
Special Cases Service Admin State — Bindings to an SDP within the service will be put into the out-of-service
state when the service is shutdown. While the service is shutdown, all customer packets are dropped
and counted as discards for billing and debugging purposes.
A service is regarded as operational providing that one IP Interface SAP and one SDP is operational.
VPRN BGP and RIP — This command disables the BGP or RIP instance on the given IP interface.
Routes learned from a neighbor that is shutdown are immediately removed from the BGP or RIP
database and RTM. If BGP or RIP is globally shutdown, then all RIP group and neighbor interfaces
are shutdown operationally. If a BGP or RIP group is shutdown, all member neighbor interfaces are
shutdown operationally. If a BGP or RIP neighbor is shutdown, just that neighbor interface is
operationally shutdown.
To Next Page
Loading...
