Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1171
description
Syntax description description-string
no description
Context config>service>vprn>if>dhcp
config>service>vprn>bgp
config>service>vprn>rip
config>service>vprn
config>service>vprn>red-if
config>service>vprn>interface
config>service>vprn>if>sap
config>service>vprn>if>dhcp
config>service>vprn>bgp
config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
config>service>vprn>rip
config>service>vprn>rip>group
config>service>vprn>rip>group>neighbor
config>service>vprn>subscriber-interface
config>service>vprn>sub-if>dhcp
config>service>vprn>sub-if>grp-if
config>service>vprn>sub-if>grp-if>dhcp
config>service>vprn>sub-if>grp-if>sap>atm
config>service>vprn>dhcp
config>service>vprn>dhcp>server>pool
config>service>vprn>sub-if>grp-if>pppoe
config>service>vprn>ipsec-interface>sap>tunnel
Description This command creates a text description stored in the configuration file for a configuration context.
The description command associates a text string with a configuration context to help identify the
content in the configuration file.
The no form of this command removes the string from the configuration.
Default No description associated with the configuration context.
Parameters string — The description character string. Allowed values are any string up to 80 characters long
composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
To Next Page
Loading...
