Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1205
Enter the no form of the command to maintain a persistent tunnel.
The no form of the command removes the idle timeout from the configuration.
Default no idle-timeout
Parameters idle-timeout — Specifies the idle timeout value, in seconds until the group is removed.
Default no idle-timeout
Values 0 — 3600
lns-group
Syntax lns-group lns-group-id
no lns-group
Context config>service>vprn>l2tp>group
Description This command configures the ISA LNS group.
Parameters lns-group-id — Specifies the LNS group ID.
Values 1..4
local-address
Syntax local-address ip-address
no local-address
Context config>service>vprn>l2tp>group>tunnel
Description This command configures the local address.
Parameters ip-address — Specifies the IP address used during L2TP authentication.
local-name
Syntax local-name host-name
no local-name
Context config>service>vprn>l2tp>group
config>service>vprn>l2tp>group>tunnel
Description This command creates the local host name used by this system for the tunnels in this L2TP group
during the authentication phase of tunnel establishment. It can be used to distinguish tunnels.
The no form of the command removes thename from the configuration.
Default local-name
To Next Page
Loading...
