VPRN Service Configuration Commands
Page 1206 7750 SR OS Services Guide
Parameters host-name — Specifies the host name, up to 64 characters in length, that the router will use to identify
itself during L2TP authentication.
Default no local-name
max-retries-estab
Syntax max-retries-estab max-retries
no max-retries-estab
Context config>service>vprn>l2tp>group
config>service>vprn>l2tp>group>tunnel
Description This command configures the number of retries allowed for this L2TP tunnel while it is established,
before its control connection goes down.
The no form of the command removes the value from the configuration.
Default no max-retries-estab
Parameters max-retries — Specifies the maximum number of retries for an established tunnel.
Default no max-retries-estab
Values 2 — 7
max-retries-not-estab
Syntax max-retries-not-estab max-retries
no max-retries-not-estab
Context config>service>vprn>l2tp>group
config>service>vprn>l2tp>group>tunnel
Description This command configures the number of retries allowed for this L2TP tunnel while it is not
established, before its control connection goes down.
The no form of the command removes the value from the configuration.
Default no max-retries-not-estab
Parameters max-retries — Specifies the maximum number of retries for non-established tunnels.
Default no max-retries-not-estab
Values 2 — 7
password
Syntax password password [hash | hash2]
no password
To Next Page
Loading...
