Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1213
Parameters idle-timeout — Specifies the idle timeout, in seconds.
Values 0 — 3600
infinite — Specifies that the tunnel will not be closed when idle.
peer
Syntax peer ip-address
no peer
Context config>service>vprn>l2tp>group>tunnel
Description This command configures the peer address.
The no form of the command removes the IP address from the tunnel configuration.
Default no peer
Parameters ip-address — Sets the LNS IP address for the tunnel.
preference
Syntax preference preference
no preference
Context config>service>vprn>l2tp>group>tunnel
Description This command configures a preference number that indicates the relative preference assigned to a
tunnel when using a weighted session assignment.
The no form of the command removes the preference value from the tunnel configuration.
Default no preference
Parameters preference — Specifies the tunnel preference number with its group. The value 0 corresponds to the
highest preference.
Values 0 — 16777215
remote-name
Syntax remote-name host-name
no remote-name
Context config>service>vprn>l2tp>group>tunnel
Description This command configures a string to be compared to the host name used by the tunnel peer during the
authentication phase of tunnel establishment.
Parameters host-name — Specifies a remote host name for the tunnel up to 64 characters in length.
To Next Page
Loading...
