Alcatel-Lucent 7750 SR - Page 1214

VPRN Service Configuration Commands
Page 1214 7750 SR OS Services Guide
Router DHCP Configuration Commands
dhcp
Syntax dhcp
Context config>service>vprn
Description This command enables the context to configure DHCP parameters.
local-dhcp-server
Syntax local-dhcp-server server-name [create]
no local-dhcp-server server-name
Context config>service>vprn>dhcp
config>service>vprn>if
Description This command instantiates a local DHCP server. A local DHCP server can serve multiple interfaces
but is limited to the routing context it was which it was created.
Default none
Parameters server-name — Specifies the name of local DHCP server.
create — Keyword used to create the server name. The create keyword requirement can be enabled/
disabled in the environment>create context.
failover
Syntax failover
Context config>service>vprn>dhcp
Description This command enables the context to configure failover parameters.
maximum-client-lead-time
Syntax maximum-client-lead-time [hrs hours] [min minutes] [sec seconds]
no maximum-client-lead-time
Context config>service>vprn>dhcp>server>failover
Description This command specifies the maximum client lead time (MCLT). The MCLT is the maximum amount
of time that one server can extend a lease for a client's binding beyond the time known by the partner
server.