Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1227
hello-interval
Syntax hello-interval hello-interval
no hello-interval
Context config>service>vprn>mvpn>provider-tunnel>inclusive>pim
Description This command specifies the interval at which PIM hello messages are transmitted on the PIM
inclusive provider tunnel.
The no form of this command reverts to the default value.
Default 30 seconds
Parameters hello-interval — Specifies the hello interval, in seconds. A 0 (zero) value disables the sending of
hello messages.
Values 0 — 255
hello-multiplier
Syntax hello-multiplier deci-units
no hello-multiplier
Context config>service>vprn>mvpn>provider-tunnel>inclusive>pim
Description This command specifies the hello multiplier. The hello-multiplier in conjunction with the hello-
interval determines the hold time for a PIM neighbor.
Hold time = (hello-interval * hello-multiplier) / 10.
The no form of the command reverts the value to the default.
Default 35
Parameters deci-units — Specifies the value, in multiples of 0.1, for the formula used to calculate the hold time
Values 20 — 100
improved-assert
Syntax [no] improved-assert
Context config>service>vprn>mvpn>provider-tunnel>inclusive>pim
Description This command enables improved assert procedure on the PIM inclusive provider tunnel.
The no form of the command disables improved assert procedure.
Default enabled
To Next Page
Loading...
