Alcatel-Lucent 7750 SR - Page 1231

Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1231
Parameters unicast — Specifies to use a unicast VRF import policy for the MVPN.
policy — Specifies a route policy name.
vrf-target
Syntax vrf-target {unicast | ext-community | export unicast | ext-community | import unicast |
ext-community}
no vrf-target
Context config>service>vprn>mvpn
Description This command specifies the route target to be added to the advertised routes or compared against the
received routes from other VRFs on the same or remote PE routers. vrf-import or vrf-export policies
override the vrf-target policy.
The no form of the command removes the vrf-target.
Default no vrf-target
Parameters unicast — Specifies to use unicast vrf-target ext-community for the multicast VPN.
ext-comm — An extended BGP community in the type:x:y format. The value x can be an integer or IP
address. The type can be the target or origin. x and y are 16-bit integers.
Values target:{ip-address:comm-val |2byte-asnumber:ext-comm-val|4byte-asnumber:comm-
val}
ip-address: a.b.c.d
comm-val: 0 — 65535
2byte-asnumber: 1 — 65535
4byte-asnumber 0 — 4294967295
import ext-community — Specify communities allowed to be accepted from remote PE neighbors.
export ext-community — Specify communities allowed to be sent to remote PE neighbors.
export
Syntax export {unicast | ext-community}
Context config>service>vprn>mvpn>vrf-target
Description This command specifies communitities to be sent to peers.
Parameters unicast — Specifies to use unicast vrf-target ext-community for the multicast VPN.
ext-comm — An extended BGP community in the type:x:y format. The value x can be an integer or IP
address. The type can be the target or origin. x and y are 16-bit integers.
Values target:{ip-address:comm-val |2byte-asnumber:ext-comm-val|4byte-asnumber:comm-
val}
ip-address: a.b.c.d
comm-val: 0 — 65535