VPRN Service Configuration Commands
Page 1284 7750 SR OS Services Guide
arp-host
Syntax arp-host
Context config>service>vprn>sub-if>grp-if
Description This command enables the context to configure ARP host parameters.
host-limit
Syntax host-limit max-num-hosts
no host-limit
Context config>service>vprn>sub-if>grp-if>arp-host
Description This command configures the maximum number of ARP hosts.
Parameters max-num-hosts — Specifies the maximum number of ARP hosts.
Values 1 — 32767
min-auth-interval
Syntax min-auth-interval min-auth-interval
no min-auth-interval
Context onfig>service>vprn>sub-if>grp-if>arp-host
Description This command configures the minimum authentication interval.
Parameters min-auth-interval — Specifies the minimum authentication interval.
Values 1 — 6000
sap-host-limit
Syntax sap-host-limit max-num-hosts-sap
no sap-host-limit
Context config>service>vprn>sub-if>grp-if>arp-host
Description This command configures the maximum number of ARP hosts per SAP.
Parameters max-num-hosts-sap — Specifies the maximum number of ARP hosts per SAP allowed on this IES
interface.
Values 1 — 32767