Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1291
The port-id must reference a valid port type. When the port-id parameter represents SONET/
SDH and TDM channels the port ID must include the channel ID. A period “.” separates the
physical port from the channel-id. The port must be configured as an access port.
If the SONET/SDH port is configured as clear-channel then only the port is specified.
create — Keyword used to create a SAP instance.
split-horizon-group group-name — Specifies the name of the split horizon group to which the SAP
belongs.
tod-suite
Syntax tod-suite tod-suite-name
no tod-suite
Context config>service>vprn>if>sap
Description This command applies a time-based policy (filter or QoS policy) to the SAP. The suite name must
already exist in the config>cron context.
Default no tod-suite
Parameters tod-suite-name — Specifies collection of policies (ACLs, QoS) including time-ranges that define the
full or partial behavior of a SAP or a subscriber. The suite can be applied to more than one SAP.
To Next Page
Loading...
