VPRN Service Configuration Commands
Page 1292 7750 SR OS Services Guide
Interface Billing Commands
accounting-policy
Syntax accounting-policy acct-policy-id
no accounting-policy
Context config>service>vprn>if>sap
config>service>vprn>if>spoke-sdp
Description This command creates the accounting policy context that can be applied to an interface SAP or
interface SAP spoke SDP.
An accounting policy must be defined before it can be associated with a SAP.
If the policy-id does not exist, an error message is generated.
A maximum of one accounting policy can be associated with a SAP at one time. Accounting policies
are configured in the config>log context.
The no form of this command removes the accounting policy association from the SAP, and the
acccounting policy reverts to the default.
Default Default accounting policy.
Parameters acct-policy-id — Enter the accounting policy-id as configured in the config>log>accounting-policy
context.
Values 1 to 99
app-profile
Syntax app-profile app-profile-name
no app-profile
Context config>service>vprn>interface>spoke-sdp
Description This command configures the application profile name.
Parameters app-profile-name — Specifies the application profile name.
Values 32 chars max
To Next Page
Loading...
