Subscriber Services
7750 SR OS Services Guide Page 141
ccag keyword
id 1 — 8
path-id a, b
cc-type [.sap-net | .net-sap]
lag-id lag-id
lag keyword
id 1 — 200
card slot-number — The card keyword is used to assign the multi-service customer site to the slot-
number given. When the multi-service customer site has been assigned to a specific slot in the
chassis, all SAPs associated with this customer site must be on a service owned by the customer
and created on the defined chassis slot. The defined slot must already have been pre-provisioned
on the system but need not be installed when the customer site assignment is made.
Values Any pre-provisioned slot number for the chassis type that allows SAP creation
slot-number 1 — 10
ingress
Syntax ingress
Context config>service>customer>multi-service-site
Description This command enables the context to configure the ingress node associate an existing scheduler
policy name with the customer site. The ingress node is an entity to associate commands that
complement the association.
egress
Syntax egress
Context config>service>customer>multi-service-site
Description This command enables the context to configure the egress node associate an existing scheduler policy
name with the customer site. The egress node is an entity to associate commands that complement the
association.
agg-rate-limit
Syntax agg-rate-limit {max | kilobits-per-second} [queue-frame-based-accounting]
no agg-rate-limit
Context config>service>customer>multi-service-site>egress
Description This command defines a maximum total rate for all egress queues on a service SAP or multi-service
site. The agg-rate-limit command is mutually exclusive with the egress scheduler policy. When an
egress scheduler policy is defined, the agg-rate-limit command will fail. If the agg-rate-limit
command is specified, at attempt to bind a scheduler-policy to the SAP or multi-service site will fail.
To Next Page
Loading...
