Alcatel-Lucent 7750 SR - Page 1415

Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1415
export-limit
Syntax export-limit number [log percentage]
no export-limit
Context config>service>vprn>rip
Description This command configures the maximum number of routes (prefixes) that can be exported into RIP
from the route table.
The no form of the command removes the parameters from the configuration.
Default no export-limit, the export limit for routes or prefixes is disabled..
Parameters number — Specifies the maximum number of routes (prefixes) that can be exported into RIP from the
route table.
Values 1 — 4294967295
log percentage — Specifies the percentage of the export-limit, at which a warning log message and
SNMP notification would be sent.
Values 1 — 100
import
Syntax import policy [policy...]
no import
Context config>service>vprn>rip
config>service>vprn>rip>group
config>service>vprn>rip>group>neighbor
Description This command specifies the import policies to be used to control routes advertised from RIP
neighbors. By default, RIP accepts all routes from configured RIP neighbors. Import policies can be
used to limit or modify the routes accepted and their corresponding parameters and metrics.
The no form of the command removes all route policy names from the import list.
Default no import
Parameters policy — A route policy statement name.
message-size
Syntax message-size max-num-of-routes
no message-size
Context config>service>vprn>rip
config>service>vprn>rip>group
config>service>vprn>rip>group>neighbor
Description This command sets the maximum number of routes per RIP update message.