VPRN Service Configuration Commands
Page 1416 7750 SR OS Services Guide
The no form of the command resets the maximum number of routes back to the default of 25.
Default no message-size
Parameters size — Integer.
Default 25
Values 25 — 255
metric-in
Syntax metric-in metric
no metric-in
Context config>service>vprn>rip
config>service>vprn>rip>group
config>service>vprn>rip>group>neighbor
Description This command sets the metric added to routes that were received from a RIP neighbor.
The no form of the command reverts the metric value back to the default.
Default no metric-in
Parameters metric — The value added to the metric of routes received from a RIP neighbor, expressed as a
decimal integer.
Values 1 — 16
metric-out
Syntax metric-out metric
no metric-out
Context config>service>vprn>rip
config>service>vprn>rip>group
config>service>vprn>rip>group>neighbor
Description This command sets the metric added to routes that were exported into RIP and advertised to RIP
neighbors.
The no form of the command removes the command from the config and resets the metric-in value
back to the default.
Default no metric-out
Parameters metric — The value added to the metric for routes exported into RIP and advertised to RIP neighbors,
expressed as a decimal integer.
Values 1 — 16
To Next Page
Loading...
