Services Commands
Page 1486 7750 SR OS Services Guide
IP interface using the same cc-id as the SAP must be associated with the opposite path. The
leading period must be included as a separator between the ccag-id and the path designator.
Values .a or .b
Default None
.sap-net — The .sap-net portion of the CCAG SAP identifier specifies that the SAP is of the SAP-2-
Net pairing type and is required when the cc-id is paired with a network IP interface. The pairing
type .sap-net is mutually exclusive with pairing type .sap-sap. If .sap-net is not specified, .sap-
sap is assumed and does not need to be included in the SAP identification. When specified, the
leading period must be used as a separator between the path designator and the pairing type.
Values .sap-net or .sap-sap
Default .sap-sap
.sap-sap — The .sap-sap portion of the CCAG SAP identifier is mutually exclusive to .sap-sap and is
used to define the pairing type as SAP-2-SAP. The .sap-sap pairing type is only used when the
cross connect object sharing the same cc-id on the opposite path is a CCAG SAP. If the other
cross connect object is a network IP interface, the pairing type must be defined as .sap-net. If
.sap-net is not specified, .sap-sap is assumed and does not need to be included in the SAP
identification. When specified, the leading period must be used as a separator between the path
designator and the pairing type.
Values .sap-net or .sap-sap
Default .sap-sap
:cc-id — The :cc-id portion of the CCAG SAP identifier is required and specifies the unique cc-id in
use by the CCAG SAP and the cross connect object on the other path.
Values 1 to 4094
Default None
create — Explicitly indicates that the specified CCAG SAP is being created by the sap command.
Handling the inclusion or exclusion state of the create keyword is dependent on the system
environment variable create.
When the system environment variable create is enabled, the system requires the explicit use of
the create keyword when creating objects such as SAPs. If the keyword is not included and the
specified CCAG SAP has not already been created, an error will occur and the CLI will not
change context to the specified CCAG SAP instance. This is designed to prevent the inadvertent
creation of a CCAG SAP in the event where the wrong CCAG SAP identifier is specified during
an attempt to edit an existing CCAG SAP. If the create keyword is specified, the CCAG SAP
will be created if it does not already exist or if it does exist, the CLI context will change to the
specified CCAG SAP.
When the system environment variable create is disabled (using the no create command), the
system will not require the create keyword when creating a CCAG SAP. In the event that the sap
command is issued with a CCAG SAP identifier that previously had not been created, that
CCAG SAP will be created.
Once a CCAG SAP has been created, the create keyword is ignored when a sap command is
executed with that CCAG SAP identifier and the CLI context will change to the specified CCAG
SAP.
To Next Page
Loading...
