Service Commands
7750 SR OS Services Guide Page 1523
*A:7710_C#
*A:sim_B# show eth-cfm mep 2 domain 103 association 99 two-way-delay-test
==================================================================
Eth CFM Two-way Delay Test Result Table
==================================================================
Peer Mac Addr Delay (us) Delay Variation (us)
------------------------------------------------------------------
00:16:4d:54:49:db 10190 13710
==================================================================
*A:sim_B#
*A:sim_B# show eth-cfm mep 2 domain 103 association 99 two-way-delay-test remote-peer
00:16:4D:54:49:DB
==================================================================
Eth CFM Two-way Delay Test Result Table
==================================================================
Peer Mac Addr Delay (us) Delay Variation (us)
------------------------------------------------------------------
00:16:4d:54:49:db 10190 13710
==================================================================
*A:sim_B#
mip
Syntax mip
Context show>eth-cfm
Description This command displays SAPs/bindings provisioned for allowing the default MIP creation.
sdp
Syntax sdp [sdp-id | far-end ip-address] [detail | keep-alive-history]
Context show>service
Description This command displays SDP information.
Parameters sdp-id — Specifies the SDP ID.
Values 1..17407
ip-address — Specifies the IP address (a..b.c.d).
detail — Adds details to the display
keep-alive-history — Displays the keep-alive-history