Show, Clear, Debug Commands
Page 1524 7750 SR OS Services Guide
Sample Output
*A:Dut-A# show service sdp 1 detail
==============================================================================
Service Destination Point (Sdp Id : 1) Details
------------------------------------------------------------------------------
Sdp Id 1 -(10.20.1.3)
------------------------------------------------------------------------------
Description : epipe sdp 1 for lspId 00:00:00:01:00:00:00:00
SDP Id : 1 SDP Source : manual
Admin Path MTU : 0 Oper Path MTU : 1492
Far End : 10.20.1.3 Delivery : MPLS
Admin State : Up Oper State : Up
Signaling : TLDP Metric : 0
Acct. Pol : None Collect Stats : Disabled
Last Status Change : 12/08/2008 22:54:30 Adv. MTU Over. : No
Last Mgmt Change : 12/08/2008 22:54:01 VLAN VC Etype : 0x8100
Bw BookingFactor : 100 PBB Etype : 0x88e7
Oper Max BW(Kbps) : 1000 Avail BW(Kbps) : 1000
Flags : None
KeepAlive Information :
Admin State : Disabled Oper State : Disabled
Hello Time : 10 Hello Msg Len : 0
Hello Timeout : 5 Unmatched Replies : 0
Max Drop Count : 3 Hold Down Time : 10
Tx Hello Msgs : 0 Rx Hello Msgs : 0
Associated LSP LIST :
Lsp Name : tof1
Admin State : Up Oper State : Up
Time Since Last Tran*: 00h04m01s
------------------------------------------------------------------------------
Class-based forwarding :
------------------------------------------------------------------------------
Class forwarding : disabled EnforceDSTELspFc : disabled
Default LSP : Uknwn Multicast LSP : None
==============================================================================
FC Mapping Table
==============================================================================
FC Name LSP Name
------------------------------------------------------------------------------
No FC Mappings
==============================================================================
* indicates that the corresponding row element may have been truncated.