Alcatel-Lucent 7750 SR - Page 1635

VPLS Show Commands
7750 SR OS Services Guide Page 1635
Number of neighbors shown: 2
============================================================================
A:active>show>service>id>gsmp#
A:active>show>service>id>gsmp# neighbors group dslam1
============================================================================
GSMP neighbors
============================================================================
Group Neighbor AdminState Sessions
----------------------------------------------------------------------------
dslam1 192.168.1.2 Enabled 0
dslam1 192.168.1.3 Enabled 0
----------------------------------------------------------------------------
Number of neighbors shown: 2
============================================================================
A:active>show>service>id>gsmp#
A:active>show>service>id>gsmp# neighbors group dslam1 192.168.1.2
============================================================================
GSMP neighbors
============================================================================
Group Neighbor AdminState Sessions
----------------------------------------------------------------------------
dslam1 192.168.1.2 Enabled 0
============================================================================
A:active>show>service>id>gsmp#
sessions
Syntax sessions [group name] neighbor ip-address] [port port-number] [association] [statistics]
Context show>service>id>gsmp
Description This command displays GSMP sessions information.
Parameters group — A GSMP group defines a set of GSMP neighbors which have the same properties.
name — Specifies a GSMP group name within the scope of the service in which it is defined.
ip-address — Specifies the ip-address of the neighbor.
port — Specifies the neighbor TCP port number use for this ANCP session.
Values 0 — 65535
association — Displays to what object the ANCP-string is associated.
statistics — Displays statistics information about an ANCP session known to the system.
Description Show Sessions Neighbor Output — The following table describes show sessions neighbor
output fields.
Label Description
State
The current state of the ANCP session.
Peer Instance
The instance number of the ANCP session at the neighbor's side.