Show, Clear, Debug Commands
Page 1702 7750 SR OS Services Guide
multi-chassis
Syntax multi-chassis
Context show>redundancy
Description This command enables the context to display multi-chassis information.
mc-endpoint
Syntax mc-endpoint statistics
mc-endpoint peer [ip-address] statistics
mc-endpoint endpoint [mcep-id] statistics
mc-endpoint peer [ip-address]
Context show>redundancy>multi-chassis
Description This command displays multi-chassis endpoint information.
Parameters statistics — Displays the global statistics for the MC endpoint.
peer ip-address — Specifies the IP address of multi-chassis end-point peer.
endpoint mcep-id — Specifies the nulti-chassis endpoint.
Values 1 — 4294967295
Sample Output
*A:Dut-B# show redundancy multi-chassis mc-endpoint statistics
===============================================================================
Multi-Chassis Endpoint Global Statistics
===============================================================================
Packets Rx : 533
Packets Rx Keepalive : 522
Packets Rx Config : 3
Packets Rx Peer Config : 1
Packets Rx State : 7
Packets Dropped Keep-Alive Task : 7
Packets Dropped Too Short : 0
Packets Dropped Verify Failed : 0
Packets Dropped Tlv Invalid Size : 0
Packets Dropped Out Of Seq : 0
Packets Dropped Unknown Tlv : 0
Packets Dropped Tlv Invalid MC-Endpoint Id : 0
Packets Dropped MD5 : 0
Packets Dropped Unknown Peer : 0
Packets Dropped MC Endpoint No Peer : 0
Packets Tx : 26099
Packets Tx Keepalive : 8221
Packets Tx Config : 2
Packets Tx Peer Config : 17872
Packets Tx State : 4
Packets Tx Failed : 0
===============================================================================
*A:Dut-B#
To Next Page
Loading...
