Alcatel-Lucent 7750 SR - Page 1714

Show, Clear, Debug Commands
Page 1714 7750 SR OS Services Guide
port-db
Syntax port-db [sap sap-id] [group grp-address [source ip-address] ]
port-db
sdp sdp-id:vc-id [group grp-address [source ip-address]]
Context clear>service>id>igmp-snooping
Description This command clears the information on the IGMP snooping port database for the VPLS service.
Parameters sap sap-id — Clears IGMP snooping statistics matching the specified SAP ID and optional
encapsulation value. See Common CLI Command Descriptions on page 1933 for command
syntax.
sdp-id — Clears only IGMP snooping entries associated with the specified mesh SDP or spoke SDP.
For a spoke SDP, the VC ID must be specified, for a mesh SDP, the VC ID is optional.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID for which to clear information.
Default For mesh SDPs only, all VC IDs.
Values 1 — 4294967295
group grp-address — Clears IGMP snooping statistics matching the specified group address.
source ip-address — Clears IGMP snooping statistics matching the specified particular source.
querier
Syntax querier
Context clear>service>id>igmp-snooping
Description This command clears the information on the IGMP snooping queriers for the VPLS service.
mfib
Syntax mfib
Context clear>service>id>
Description This command enables the context to clear multicast FIB info for the VPLS service.
statistics
Syntax statistics {all | ip | mac}
statistics group grp-address}
statistics [all | sap sap-id]
Context clear>service>id>mfib