VPLS Clear Commands
7750 SR OS Services Guide Page 1713
sdp-id — The SDP ID to be cleared.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID to be cleared.
Values 1 — 4294967295
statistics
Syntax statistics [sap sap-id | sdp [sdp-id[:vc-id] | interface [ip-address | ip-int-name]]
Context clear>service>id>dhcp
Description Clears DHCP statistics for this service.
Parameters sap-id — Clears the specified SAP statistics. See Common CLI Command Descriptions on page 1933
for command syntax.
sdp-id — The SDP ID to be cleared.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID to be cleared.
Values 1 — 4294967295
interface ip-int-name — Clears the statistics for the IP interface with the specified name.
interface ip-addr — Clears the statistics for the IP interface with the specified IP address.
statistics
Syntax statistics {all | sap sap-id | sdp sdp-id:vc-id}]
Context clear>service>id>igmp-snooping
Description Clears IGMP snooping statistics for the VPLS service.
Parameters sap sap-id — Clears the IGMP snooping information on the specified SAP. See Common CLI
Command Descriptions on page 1933 for command syntax.
sdp sdp-id — Clears only IGMP snooping entries associated with the specified mesh SDP or spoke
SDP. For a spoke SDP, the VC ID must be specified, for a mesh SDP, the VC ID is optional.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID for which to clear statistics.
Default For mesh SDPs only, all VC IDs.
Values 1 — 4294967295
To Next Page
Loading...
