Alcatel-Lucent 7750 SR - Page 1720

Show, Clear, Debug Commands
Page 1720 7750 SR OS Services Guide
Description This command enables debugging of the applicant state machine.
The no form of the command disables debugging of the applicant state machine.
leave-all-sm
Syntax [no] leave-all-sm
Context debug>service>id>mrp
Description This command enables debugging of the leave all state machine.
The no form of the command disables debugging of the leave all state machine.
mmrp-mac
Syntax [no] mmrp-mac ieee-address
Context debug>service>id>mrp
Description This command filters debug events and only shows events related to the MAC address specified.
The no form of the command removes the debug filter.
Parameters ieee-address — xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx (cannot be all zeroes)
mrpdu
Syntax [no] mrpdu
Context debug>service>id>mrp
Description This command enables debugging of the MRP PDUs that are received or transmitted.
The no form of the command disables debugging of MRP PDUs.