Alcatel-Lucent 7750 SR - Page 1721

VPLS Debug Commands
7750 SR OS Services Guide Page 1721
periodic-sm
Syntax [no] periodic-sm
Context debug>service>id>mrp
Description This command enables debugging of the periodic state machine.
The no form of the command disables debugging of the periodic state machine.
registrant-sm
Syntax [no] registrant-sm
Context debug>service>id>mrp
Description This command enables debugging of the registrant state machine.
The no form of the command disables debugging of the registrant state machine.
sap
Syntax [no] sap sap-id
Context debug>service>id>mrp
Description This command filters debug events and only shows events for the particular SAP.
The no form of the command removes the debug filter.
Parameters sap-id — See Common CLI Command Descriptions on page 1933 for command syntax.
sdp
Syntax [no] sdp sdp-id:vc-id
Context debug>service>id>mrp
Description This command filters debug events and only shows events for the particular SDP.
The no form of the command removes the debug filter.
Parameters sdp-id — Displays only MLD entries associated with the specified mesh SDP or spoke SDP.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID for which to display information.
Values 1 — 4294967295