IES Show Commands
7750 SR OS Services Guide Page 1761
host-connectivity-verify
Syntax host-connectivity-verify statistics [sap sap-id]
Context show>service>id
Description Displays host connectivity check statistics.
Parameters statistics — Displays host connectivity verification data.
sap sap-id — See Common CLI Command Descriptions on page 1933 for command syntax.
Output Show Service Id Host Connectivity Verify — The following table describes show service-id
host connectivity verification output fields:
Sample Output
A:ALA-48>show>service>id# host-connectivity-verify statistics sap 1/1/9:0
==============================================================================
Host connectivity check statistics
==============================================================================
Svc SapId/ DestIp Last Time Oper
Id SdpId Address Response Expired State
------------------------------------------------------------------------------
1000 5/2/3:0 143.144.145.1 Up
==============================================================================
A:ALA-48>show>service>id#
interface
Syntax interface [ip-address | ip-int-name] [interface-type] [detail] [family]
Context show>service>id
Description This command displays information for the IP interfaces associated with the IES service. If no
optional parameters are specified, a summary of all IP interfaces associated to the service are
displayed.
Parameters ip-address — The IP address of the interface for which to display information.
Label Description
Svc Id
The service identifier.
SapId/SdpId
The SAP and SDP identifiers.
DestIp Address
The destination IP address.
Last Response
The time when the last response was received.
Time Expired
Displays whether the interval value has expired.
Oper State
Displays the current operational state of the service.
To Next Page
Loading...
