Alcatel-Lucent 7750 SR - Page 1777

IES Clear Commands
7750 SR OS Services Guide Page 1777
interface
Syntax interface [ip-int-name | ip-addr] [icmp]
Context clear>router
Description This command clears IP interface statistics.
If no IP interface is specified either by IP interface name or IP address, the command will perform the
clear operation on all IP interfaces.
Parameters ip-int-name | ip-addr — The IP interface name or IP interface address.
Default All IP interfaces.
icmp — Specifies to reset the ICMP statistics for the IP interface(s) used for ICMP rate limit.
interface
Syntax interface interface-name [vrid virtual-router-id]
interface interface-name vrid vritual-router-id ipv6
Context clear>router>vrrp
Description This command clears and resets VRRP instances.
Parameters interface-name — [32 chars max]
virtual-router-id — [1..255]
statistics
Syntax statistics interface interface-name [vrid virtual-router-id]
statistics
statistics interface interface-name vrid virtual-router-id ipv6
Context clear>router>vrrp
Description This command clears statistics for VRRP instances.
Parameters interface-name — [32 chars max]
virtual-router-id — [1..255]
fdb
Syntax fdb {all | mac ieee-address | sap sap-id] | mesh-sdp sdp-id[:vc-id] | spoke-sdp sdp-id:vc-
id}
Context clear>service>id
Description This command clears FDB entries for the service.