VPRN Show Commands
7750 SR OS Services Guide Page 1819
Vrf Target : target:10001:1
Vrf Import : vrfImpPolCust1
Vrf Export : vrfExpPolCust1
SAP Count : 1 SDP Bind Count : 18
------------------------------------------------------------------------------
Service Access & Destination Points
------------------------------------------------------------------------------
Identifier Type AdmMTU OprMTU Adm Opr
------------------------------------------------------------------------------
sap:1/1/7:0 q-tag 1518 1518 Up Up
sdp:10:1 M(10.20.1.3) TLDP 4462 4462 Up TLDP Down
sdp:20:1 M(10.20.1.4) TLDP 4462 4462 Up TLDP Down
sdp:30:1 M(10.20.1.5) TLDP 4462 4462 Up TLDP Down
sdp:40:1 M(10.20.1.20) TLDP 1534 4462 Up Up
sdp:200:1 M(10.20.1.30) TLDP 1514 4462 Up Up
sdp:300:1 M(10.20.1.31) TLDP 4462 4462 Up TLDP Down
sdp:500:1 M(10.20.1.50) TLDP 4462 4462 Up TLDP Down
==============================================================================
*A:ALA-12#
dhcp
Syntax dhcp
Context show>service>id
Description This command enables the context to display DHCP information for the specified service.
lease-state
Syntax lease-state [[sap sap-id] [sdp [sdp-id[:vc-id]]] | [interface interface-name] | [ip-address ip-
address[/mask]] | [mac ieee-address] | [wholesaler service-id] ] [detail]
Context show>service>id>dhcp
Description This command displays DHCP lease state related information. Refer to the following for various
show command output:
• Lease State Sample Output on page 1820
• Routed CO Sample Output on page 1820
• Wholesaler/Retailer Sample Output on page 1821
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Command Descriptions on page 1933 for command syntax.
sdp-id — The SDP identifier.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID for which to display information.
Values 1 — 4294967295
interface interface-name — Displays information for the specified IP interface.
ip-address ip-address — Displays information associated with the specified IP address.