Alcatel-Lucent 7750 SR - Page 1841

VPRN Show Commands
7750 SR OS Services Guide Page 1841
subscriber-hosts
Syntax subscriber-hosts [sap sap-id ] [ip ip-address[/mask]] [mac ieee-address] [sub-profile sub-
profile-name] [sla-profile sla-profile-name] [detail]
subscriber-hosts [detail] wholesaler service-id
Context show>service>id
Description This command displays subscriber host information.
Parameters sap sap-id — Displays the specified subscriber host SAP information. See Common CLI Command
Descriptions on page 1933 for command syntax.
ip-address/mask — The IP address of the IP interface. The ip-address portion of the address
command specifies the IP host address that will be used by the IP interface within the subnet.
This address must be unique within the subnet and specified in dotted decimal notation.
Values 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
mask: 1 — 32
ieee-address — Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or
aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are
any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
sub-profile sub-profile-name — Specifies an existing subscriber profile name to be associated with
the static subscriber host. The subscriber profile is configured in the config>subscr-mgmt>sub-
profile context.
sla-profile sla-profile-name — Specifies an existing SLA profile name to be associated with the
static subscriber host. The SLA profile is configured in the config>subscr-mgmt>sla-profile
context.
detail — Displays detailed information.
wholesaler service-id — The VPRN service ID of the wholesaler.
Values 1 — 2147483648
aggregate
Syntax aggregate [active]
Context show>router
Description This command displays aggregated routes.
Parameters active — This keyword filters out inactive aggregates.
Output Show Aggregate Output Fields — The following table describes router aggregate output fields.
Label Description
Prefix
Displays the destination address of the aggregate route in dotted
decimal notation.
Summary
Specifies whether the aggregate or more specific components are
advertised.