Alcatel-Lucent 7750 SR - Page 1842

Show, Clear, Debug Commands
Page 1842 7750 SR OS Services Guide
Sample Output
*A:ALA-12# show router 3 aggregate
==============================================================================
Aggregates (Service: 3)
==============================================================================
Prefix Summary AS Set Aggr AS Aggr IP-Address State
------------------------------------------------------------------------------
------------------------------------------------------------------------------
No. of Aggregates: 0
-----------------------------------------------------------
*A:ALA-12#
arp
Syntax arp [ip-address | ip-int-name | mac ieee-mac-addr]
Context show>router
Description This command displays the router ARP table sorted by IP address.
If no command line options are specified, all ARP entries are displayed.
Parameters ip-addr — Only displays ARP entries associated with the specified IP address.
ip-int-name — Only displays ARP entries associated with the specified IP interface name.
mac ieee-mac-addr — Only displays ARP entries associated with the specified MAC address.
Output ARP Table Output — The following table describes ARP table output fields:
AS Set
Displays an aggregate where the path advertised for the route con-
sists of all elements contained in all paths that are being summarized.
Aggr AS
Displays the aggregator path attribute to the aggregate route.
Aggr IP-Address
The IP address of the aggregated route.
State
The operational state of the aggregated route.
No. of Aggregates
The total number of aggregated routes.
Label Description
IP Address
The IP address of the ARP entry.
MAC Address
The MAC address of the ARP entry.
Expiry
The age of the ARP entry.