Alcatel-Lucent 7750 SR - Page 1874

Show, Clear, Debug Commands
Page 1874 7750 SR OS Services Guide
Sample Output
*A:ALA-12# show router 3 rip peers
==============================================================================
None — Specifies that no RIP messages are sent (i.e., silent listener).
RIPv1 — Specifies that RIPv1 formatted messages are sent to the
broadcast address.
Recv Mode
Both — Specifies that RIP updates in either version 1 or version 2
format will be accepted.
None — Specifies that RIP updates will not be accepted.
RIPv1 — Specifies that RIP updates in version 1 format only will be
accepted.
RIPv2 — Specifies that RIP updates in version 2 format only will be
accepted.
Metric In
The metric value added to routes received from a RIP neighbor.
Metric Out
The value added to routes exported into RIP and advertised to RIP
neighbors.
Split Horizon
Disabled — Split horizon disabled for the neighbor.
Enabled — Split horizon and poison reverse enabled for the neigh-
bor.
Check Zero
Disabled — Checking of the mandatory zero fields in the RIPv1
and RIPv2 specifications are not checked allowing receipt of RIP mes-
sages even if mandatory zero fields are non-zero for the neighbor.
Enabled — checking of the mandatory zero fields in the RIPv1 and
RIPv2 specifications and rejecting non-compliant RIP messages is
enabled for the neighbor.
Message Size
The maximum number of routes per RIP update message.
Preference
The preference of RIP routes from the neighbor.
Auth. Type
Specifies the authentication type.
Update Timer
The current setting of the RIP update timer value expressed in seconds.
Timeout Timer
The current RIP timeout timer value expressed in seconds.
Export Policies
The export route policy that is used to determine routes advertised to all
peers.
Import Policies
The import route policy that is used to determine which routes are
accepted from RIP neighbors.
Label Description (Continued)