Show, Clear, Debug Commands
Page 1894 7750 SR OS Services Guide
statistics
Syntax statistics [neighbor {ip-address | ip-int-name}]
Context clear>router>rip
Description This command clears statistics for RIP neighbors.
Parameters neighbor {ip-address | ip-int-name} — Clears the statistics for the specified RIP interface.
Default Clears statistics for all RIP interfaces.
id
Syntax id service-id
Context clear>service
clear>service>statistics
Description This command clears commands for a specific service.
Parameters service-id — The ID that uniquely identifies a service.
Values 1 — 2147483648
sap
Syntax sap sap-id {all | counters | stp}
Context clear>service>statistics
Description Clears SAP statistics for a SAP.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Command Descriptions on page 1933 for command syntax.
dhcp
Syntax dhcp
Context clear>router>dhcp
Description This command enables the context to clear DHCP parameters.
lease-state
Syntax lease-state
lease-state ip-address ip-address
To Next Page
Loading...
