Alcatel-Lucent 7750 SR - Page 1899

VPRN Debug Commands
7750 SR OS Services Guide Page 1899
Syntax [no] sap sap-id
Context debug>service>id>host-connectivity-verify
Description This command displays Subscriber Host Connectivity Verification (SHCV) events for a particular
SAP.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Command Descriptions on page 1933 for command syntax.
sap
Syntax [no] sap sap-id
Context debug>service>id
debug>service>id>dhcp
debug>service>stp
Description This command enables STP debugging for a specific SAP.
The no form of the command disables debugging.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Command Descriptions on page 1933 for command syntax.
sdp
Syntax [no] sdp sdp-id:vc-id
Context debug>service>id
debug>service>id>dhcp
debug>service>stp
Description This command enables STP debugging for a specific SDP.
The no form of the command disables debugging.
event-type
Syntax [no] event-type {config-change | svc-oper-status-change | sap-oper-status-change |
sdpbind-oper-status-change}
Context debug>service>id
Description This command enables debugging for a particular event type.
The no form of the command disables debugging.