Alcatel-Lucent 7750 SR - Page 1925

7750 SR OS Services Guide Page 1925
Dro. HiPrio : 0 0
Dro. LoPrio : 0 0
For. InProf : 0 0
For. OutProf : 0 0
Egress Queue 1
For. InProf : 0 0
For. OutProf : 0 0
Dro. InProf : 0 0
Dro. OutProf : 0 0
-------------------------------------------------------------------------------
CEM SAP Configuration Information
-------------------------------------------------------------------------------
Endpoint Type : NxDS0 Speed : 768
Payload Size : 96 Jitter Buffer : 5
Use RTP Header : No CAS Trunk Framing : No CAS
Idle Fill Type : All Ones Idle Pattern : n/a
===============================================================================
A:sim216#
base
Syntax base
Context show>service>id
Description Displays basic information about the service ID including service type, description, SAPs and SDPs.
Output Show Service-ID Base — The following table describes show service-id base output fields:
Label Description
Service Id
The service identifier.
Vpn Id
Specifies the VPN ID assigned to the service.
Service Type
Specifies the type of service.
Description
Generic information about the service.
Customer Id
The customer identifier.
Last Mgmt Change
The date and time of the most recent management-initiated change to
this customer.
Adm
The administrative state of the service.
Oper
The operational state of the service.
Mtu
The largest frame size (in octets) that the service can handle.
Def. Mesh VC Id
This object is only valid in services that accept mesh SDP bindings. It is
used to validate the VC ID portion of each mesh SDP binding defined
in the service.
SAP Count
The number of SAPs defined on the service.