Alcatel-Lucent 7750 SR - Page 281

Virtual Leased Line Services
7750 SR OS Services Guide Page 281
S-PE2: Note that specifying the vc-switching parameter enables a VC cross-connect so the
service manager does not signal the VC label mapping immediately but will put this into passive
mode.
The following example displays the configuration:
*A:ALA-S-PE2>config>service>epipe# info
----------------------------------------------
...
spoke-sdp 2:200 create
exit
spoke-sdp 3:300 create
exit
no shutdown
----------------------------------------------
*A:ALA-S-PE2>config>service>epipe#