Virtual Leased Line Services
7750 SR OS Services Guide Page 339
Parameters refresh interval — Specifies the interval, in seconds, between ARP requests sent on this Ipipe SAP.
Values 0 — 65535
accounting-policy
Syntax accounting-policy acct-policy-id
no accounting-policy
Context config>service>apipe>sap
config>service>cpipe>sap
config>service>epipe>sap
config>service>epipe>spoke-sdp
config>service>fpipe>sap
config>service>ipipe
Description This command creates the accounting policy context that can be applied to a SAP.
An accounting policy must be defined before it can be associated with a SAP. If the policy-id does not
exist, an error message is generated.
A maximum of one accounting policy can be associated with a SAP at one time. Accounting policies
are configured in the config>log context.
The no form of this command removes the accounting policy association from the SAP, and the
acccounting policy reverts to the default.
Default Default accounting policy.
Parameters acct-policy-id — Enter the accounting policy-id as configured in the config>log>accounting-policy
context.
Values 1 — 99
app-profile
Syntax app-profile app-profile-name
no app-profile
Context config>service>vpls>sap
Description This command configures the application profile name.
Parameters app-profile-name — Specifies an existing application profile name configured in the config>app-
assure>group>policy context.
bandwidth
Syntax bandwidth bandwidth
no bandwidth
To Next Page
Loading...
