Alcatel-Lucent 7750 SR - Page 349

Virtual Leased Line Services
7750 SR OS Services Guide Page 349
Description This command configures the client maintenance entity group (MEG) level(s) to use for AIS message
generation. Up to 7 levels can be provisioned with the restriction that the client MEG level must be
higher than the local MEG level.
Parameters level — Specifies the client MEG level.
Values 1 — 7
Default 1
interval
Syntax interval {1 | 60}
no interval
Context config>service>epipe>spoke-sdp>eth-cfm>mep>ais-enable
config>service>epipe>sap>eth-cfm>mep>ais-enable
Description This command specifies the transmission interval of AIS messages in seconds.
Parameters 1 | 60 — The transmission interval of AIS messages in seconds.
Default 1
priority
Syntax priority priority-value
no priority
Context config>service>epipe>spoke-sdp>eth-cfm>mep>ais-enable
config>service>epipe>sap>eth-cfm>mep>ais-enable
Description This command specifies the priority of AIS messages originated by the node.
Parameters priority-value — Specify the priority value of the AIS messages originated by the node.
Values 0 — 7
Default 1
ccm-enable
Syntax [no] ccm-enable
Context config>service>epipe>spoke-sdp>eth-cfm>mep
config>service>epipe>sap>eth-cfm>mep
Description This command enables the generation of CCM messages.
The no form of the command disables the generation of CCM messages.