Alcatel-Lucent 7750 SR - Page 360

VLL Service Configuration Commands
Page 360 7750 SR OS Services Guide
ipv6 ipv6-filter-id — Specifies the IPv6 filter policy. The filter ID must already exist within the
created IPv6 filters.
Values 1 — 65535
qos
Syntax qos policy-id [shared-queuing]
no qos
Context config>service>apipe>sap>egress
config>service>apipe>sap>ingress
config>service>cpipe>sap>egress
config>service>cpipe>sap>ingress
config>service>fpipe>sap>egress
config>service>fpipe>sap>ingress
config>service>ipipe>sap>egress
config>service>ipipe>sap>ingress
config>service>epipe>sap>egress
config>service>epipe>sap>ingress
Description This command associates a Quality of Service (QoS) policy with an ingress or egress Service Access
Point (SAP) or IP interface.
QoS ingress and egress policies are important for the enforcement of SLA agreements. The policy ID
must be defined prior to associating the policy with a SAP or IP interface. If the policy-id does not
exist, an error will be returned.
The qos command is used to associate both ingress and egress QoS policies. The qos command only
allows ingress policies to be associated on SAP or IP interface ingress and egress policies on SAP or
IP interface egress. Attempts to associate a QoS policy of the wrong type returns an error.
Only one ingress and one egress QoS policy can be associated with a SAP or IP interface at one time.
Attempts to associate a second QoS policy of a given type will return an error.
By default, if no specific QoS policy is associated with the SAP or IP interface for ingress or egress,
so the default QoS policy is used.
The no form of this command removes the QoS policy association from the SAP or IP interface, and
the QoS policy reverts to the default.
policy-id — The ingress/egress policy ID to associate with SAP or IP interface on ingress/egress. The
policy ID must already exist.
Values 1 — 65535
shared-queuing — This keyword can only be specified on SAP ingress. The shared-queueing
keyword specifies the shared queue policy will be used by this SAP. When the value of this
object is null, the SAP will use individual ingress QoS queues, instead of the shared ones.
queue-override
Syntax [no] queue-override