Virtual Leased Line Services
7750 SR OS Services Guide Page 361
Context config>service>apipe>sap>egress
config>service>apipe>sap>ingress
config>service>cpipe>sap>egress
config>service>cpipe>sap>ingress
config>service>fpipe>sap>egress
config>service>fpipe>sap>ingress
config>service>ipipe>sap>egress
config>service>ipipe>sap>ingress
config>service>epipe>sap>egress
config>service>epipe>sap>ingress
Description This command enables the context to configure override values for the specified SAP egress or
ingress QoS queue. These values override the corresponding ones specified in the associated SAP
egress or ingress QoS policy. If the policy was created as a template policy, this command overrides
the parameter and its description and queue parameters in the policy.
queue
Syntax [no] queue queue-id
Context config>service>apipe>sap>egress>queue-override
config>service>apipe>sap>ingress>queue-override
config>service>cpipe>sap>egress>queue-override
config>service>cpipe>sap>ingress>queue-override
config>service>fpipe>sap>egress>queue-override
config>service>fpipe>sap>ingress>queue-override
config>service>ipipe>sap>egress>queue-override
config>service>ipipe>sap>ingress>queue-override
config>service>epipe>sap>egress>queue-override
config>service>epipe>sap>ingress>queue-override
Description This command specifies the ID of the queue whose parameters are to be overridden.
Parameters queue-id — The queue ID whose parameters are to be overridden.
Values 1 — 32
adaptation-rule
Syntax adaptation-rule [pir adaptation-rule}] [cir adaptation-rule}]
no adaptation-rule
Context config>service>apipe>sap>egress>queue-override>queue
config>service>apipe>sap>ingress>queue-override>queue
config>service>fpipe>sap>egress>queue-override>queue
config>service>fpipe>sap>ingress>queue-override>queue
config>service>ipipe>sap>egress>queue-override>queue
config>service>ipipe>sap>ingress>queue-override>queue
config>service>epipe>sap>egress>queue-override>queue
config>service>epipe>sap>ingress>queue-override>queue
To Next Page
Loading...
