Page 552 7750 SR OS Services Guide
Configuring VPLS Spoke SDPs with Split Horizon
To configure spoke SDPs with a split horizon group, add the split-horizon-group parameter when
creating the spoke SDP. Traffic arriving on a SAP or spoke SDP within a split horizon group will
not be copied to other SAPs or spoke SDPs in the same split horizon group.
The following example displays a VPLS configuration with split horizon enabled:
*A:ALA-1>config>service# info
----------------------------------------------
...
vpls 800 customer 6001 vpn 700 create
description "VPLS with split horizon for DSL"
stp
shutdown
exit
spoke-sdp 51:15 split-horizon-group DSL-group1 create
exit
split-horizon-group DSL-group1
description "Split horizon group for DSL"
exit
no shutdown
exit
...
----------------------------------------------
*A:ALA-1>config>service#
To Next Page
Loading...
