Virtual Private LAN Services
Page 624 7750 SR OS Services Guide
m-vpls — Specifies a management VPLS.
b-vpls | i-vpls — Creates a backbone-vpls or ISID-vpls.
create — This keyword is mandatory while creating a VPLS service.
backbone-smac
Syntax backbone-smac ieee-address
Context config>service>vpls
Description This command configures the backbone source MAC address used for PBB. This command allows a
per B-VPLS control of the B-SMAC and the B-Mcast MAC. All I-VPLS provisioned under this B-
VPLS will share the provisioned value.
Default backbone-smac address is chassis MAC address
Parameters ieee-address — Specifies the backbone source MAC address.
backbone-vpls
Syntax backbone-vpls vpls-id[:isid]
no backbone-vpls
Context config>service>vpls
Description This command associated the I-VPLS with the B-VPLS service. The ISID value is used to mux/
demux packets for the VPLS flowing through the B-VPLS.
Parameters vpls-id — This value represents the VPLS ID value associated with the B-VPLS.
isid — Defines ISID associated with the I-VPLS.
Default The default is the service-id.
Values 0 — 16777215
stp
Syntax [no] stp
Context config>service>vpls>backbone-vpls
Description This command enables STP on the backbone VPLS service.
The no form of the command disables STP on the backbone VPLS service.
To Next Page
Loading...
