Virtual Private LAN Services
7750 SR OS Services Guide Page 637
move-frequency
Syntax move-frequency frequency
no move-frequency
Context config>service>vpls>mac-move
Description This command indicates the maximum rate at which MAC's can be re-learned in the VPLS service,
before the SAP where the moving MAC was last seen is automatically disabled in order to protect the
system against undetected loops or duplicate MAC's.
The no form of the command reverts to the default value.
Default 2 (when mac-move is enabled). For example, 10 relearns in a 5 second period.
Parameters frequency — Specifies the rate, in 5-second intervals for the maximum number of relearns.
Values 1 — 100
number-retries
Syntax number-retries number-retries
no number-retries
Context config>service>vpls>mac-move
Description This command configures the number of times retries are performed for reenabling the SAP/SDP.
Parameters number-retries
Specifies number of retries for reenabling the SAP/SDP. A zero (0) value indicates unlimited
number of retries.
Values 0 — 255
primary-ports
Syntax primary-ports
Context config>service>vpls>mac-move
Description This command enables the context to define primary VPLS ports. VPLS ports that were declared as
secondary prior to the execution of this command will be moved from secondary port-level to
primary port-level. Changing a port to the tertiary level can only be done by first removing it from the
secondary port-level.
To Next Page
Loading...
