Virtual Private LAN Services
Page 720 7750 SR OS Services Guide
def-sub-profile
Syntax def-sub-profile default-subscriber-profile-name
Context config>service>vpls>sap>sub-sla-mgmt
Description This command specifies a default subscriber profile for this SAP. The subscriber profile must be
defined prior to associating the profile with a SAP in the config>subscriber-mgmt>sub-profile
context.
A subscriber profile defines the aggregate QoS for all hosts within a subscriber context. This is done
through the definition of the egress and ingress scheduler policies that govern the aggregate SLA for
subscriber using the subscriber profile. Subscriber profiles also allow for specific SLA profile
definitions when the default definitions from the subscriber identification policy must be overridden.
The no form of the command removes the default SLA profile from the SAP configuration.
Parameters default-sub-profile — Specifies a default subscriber profile for this SAP. The subscriber profile must
be defined prior to associating the profile with a SAP in the config>subscriber-mgmt>sub-
profile context.
mac-da-hashing
Syntax [no] mac-da-hashing
Context config>service>vpls>sap>sub-sla-mgmt
Description This command specifies whether subscriber traffic egressing a LAG SAP has its egress LAG link
selected by a function of the MAC destination address instead of the subscriber ID.
This command is only meaningful if subscriber management is enabled and can be configured for this
VPLS service.
multi-sub-sap
Syntax multi-sub-sap [subscriber-limit]
no multi-sub-sap
Context config>service>vpls>sap>sub-sla-mgmt
Description This command configures the maximum number of subscribers for this SAP.
The no form of this command returns the default value.
Parameters number-of-sub — Specifies the maximum number of subscribers for this SAP.
Values 2 — 8000
To Next Page
Loading...
