Alcatel-Lucent 7750 SR - Page 719

Virtual Private LAN Services
7750 SR OS Services Guide Page 719
def-inter-dest-id
Syntax def-inter-dest-id {string string | use-top-q}
no def-inter-dest-id
Context config>service>vpls>sap>sub-sla-mgmt
Description This command specifies a default destination string for all subscribers associated with the SAP. The
command also accepts the use-top-q flag that automatically derives the string based on the top most
delineating Dot1Q tag from the SAP’s encapsulation.
The no form of the command removes the default subscriber identification string from the configura-
tion.
no def-sub-id
Default no def-inter-dest-id
Parameters use-top-q — Derives the string based on the top most delineating Dot1Q tag from the SAP’s
encapsulation.
string string — Specifies the subscriber identification applicable for a subscriber host.
def-sla-profile
Syntax def-sla-profile default-sla-profile-name
no def-sla-profile
Context config>service>vpls>sap>sub-sla-mgmt
Description This command specifies a default SLA profile for this SAP. The SLA profile must be defined prior to
associating the profile with a SAP in the config>subscriber-mgmt>sla-profile context.
An SLA profile is a named group of QoS parameters used to define per service QoS for all subscriber
hosts common to the same subscriber within a provider service offering. A single SLA profile may
define the QoS parameters for multiple subscriber hosts. SLA profiles are maintained in two
locations, the subscriber identification policy and the subscriber profile templates. After a subscriber
host is associated with an SLA profile name, either the subscriber identification policy used to
identify the subscriber or the subscriber profile associated with the subscriber host must contain an
SLA profile with that name. If both the subscriber identification policy and the subscriber profile
contain the SLA profile name, the SLA profile in the subscriber profile is used.
The no form of the command removes the default SLA profile from the SAP configuration.
Default no def-sla-profile
Parameters default-sla-profile-name — Specifies a default SLA profile for this SAP. The SLA profile must be
defined prior to associating the profile with a SAP in the config>subscriber-mgmt>sla-profile
context.