Virtual Private LAN Services
Page 746 7750 SR OS Services Guide
The execution of this command will fail as soon as at least one of the currently managed SAPs (all
SAPs falling within the specified managed-vlan-range) does not have l2pt-termination enabled, and
this regardless its admin/operational status.
If force-l2pt-boundary is enabled on a given m-vpls SAP, all newly created SAPs falling into the
specified managed-vlan-range will have l2pt-termination enabled per default.
Extending or adding new range into a managed-vlan-range declaration will fail as soon as there is at
least one SAPs falling into the specified vlan-range does not have l2pt-termination enabled.
Disabling l2pt-termination on currently managed SAPs will fail as soon as the force-l2pt-boundary is
enabled under corresponding m-vpls SAP.
frame-relay
Syntax frame-relay
Context config>service>vpls>sap
Description This command enables the context to configure frame-relay parameters.
frf-12
Syntax [no] frf-12
Context config>service>vpls>sap>fr
Description This command enables FRF12 headers. This must be set to disabled for this entry to be added to an
MLFR bundle.
The no form of the command disables FRF12 headers.
ete-fragment-threshold
Syntax ete-fragment-threshold threshold
no ete-fragment-threshold
Context config>service>vpls>sap>fr>frf-12
Description This command configures the FRF.12 fragmentation threshold.
The no form of the command rremoves the value.
Default 128
Parameters threshold — Specifies the maximum length of a fragment to be transmitted.
Values 128 — 512
To Next Page
Loading...
