IES Service Configuration Commands
7750 SR OS Services Guide Page 989
Values x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
prefix-length [1..128]
mac-address — Specifies the 48-bit MAC address for the IPv6-to-MAC address mapping in the form
aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC
addresses.
backup
Syntax [no] backup ip-address
Context config>service>ies>if>ipv6>vrrp
Description This command configures virtual router IP addresses for the interface.
init-delay
Syntax init-delay seconds
no init-delay
Context config>service>ies>if>ipv6>vrrp
Description This command configures a VRRP initialization delay timer.
Default no init-delay
Parameters seconds — Specifies the initialization delay timer for VRRP, in seconds.
Values 1 — 65535
mac
Syntax mac mac-address
no mac
Context config>service>ies>if>ipv6>vrrp
Description This command assigns a specific MAC address to an IES IP interface.
The no form of the command returns the MAC address of the IP interface to the default value.
Default The physical MAC address associated with the Ethernet interface that the SAP is configured on (the
default MAC address assigned to the interface, assigned by the system).
Parameters mac-address — Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or
aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are
any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.