Chapter 3: Fusion Modes
3
123
Setting Track Parameters
Menu: Song/Track/General
Parameter: EDIT Track
Value Range: (Varies depending on how many tracks have been
created)
Select the track you’d like to edit using this parameter.
Menu: Song/Track/General
Parameter: Program (not available for audio tracks)
Value Range: (Varies depending on what program has been
selected)
Select the bank (the top line) and program number (the bottom line) that
you’d like to select for this track. The name of the program is listed in
the large, bold letters in the middle of the screen.
Menu: Song/Track/General
Parameter: Record Arm
Value Range: Auto, Off, On
This parameter determines whether the currently selected track will be
recorded once you enter record mode. Set this parameter to “on” when
you want the current track to be recorded and “off ” when you want the
track to simply playback without being recorded. Note that audio tracks
set to “Auto” will only change record arm state will the song is stopped.
The “Auto” setting will arm the track for recording when selected as the
current “EDIT Track.” When a different track is selected then this track
will disable its arm status.
Menu: Song/Track/General
Parameter: Link
Value Range: None, A-T
Link allows for mixes to be emulated in Song mode.
If you link several tracks to the same “Link” letter then the programs can
be played and recorded together, as if playing the mix in Song mode.
To Next Page
Loading...
Need help?
General
